top of page
Background VAULT V2+ RCT.png

V2+ rct

2 Friends; 12 months; 1 vision  – creating an incredible watch 

We met a couple of years ago working on the V1-X and have become good friends. During the first Swiss lockdown back in 2020, we decided to create a new watch and kicked off an exciting journey during which we overcame big challenges, tried out new technologies, made new friends and had the chance to bring in some light in a time plagued by the global pandemic.

This is the story of two friends building a new chapter in VAULT`s history and having a lot of fun in the process. Enjoy the ride 😊

Albert Zeller, CEO RC Tritec

Mark Schwarz, Founder VAULT

Albert Mark RCT.png
DetailShot_V2Plus_front_1920x1080px.jpg

A BUSINESSMAN BY DAY, SUPERHERO BY NIGHT

A TIMEPIECE BRUCE WAYNE WOULD WEAR

We kicked off project RCT back in May 2020 with three clear objectives:

The two of us don’t like to just stick to what has been done in the past. We wanted to challenge the status quo, innovate, and explore new directions. It doesn’t make life easier but rather a life worthwhile.

Project RCT would lead to a stealthy watch by day and a showstopper by night. A watch that Bruce Wayne could wear at a business meeting in the afternoon and while chasing the Joker as Batman by night.

Last but not least, we wanted to have a lot of fun in the process, which (spoiler alert) we had 😊

DARK-MATTER CARBON COMPOSITE CASE

A STEALTHY ULTRA-LIGHTWEIGHT COMPOSITE

PASSION & LOVE

DO WHAT YOU DO WITH PASSION AND LOVE

From the get-go, we were committed to giving the RCT lots of personality. Therefore, we decided to engrave the movement main plate with a heart representing Albert’s life motto to do what you do with passion and love. As Albert belongs to the straight edge movement, which is about living a sober and positive life, we added an X-engraving to the plate as well, which was engraved by our friend and watchmaker Marc Jenni.

 

In line with the stealthy look we wanted to achieve, the brass main plate was rhodium plated by Marc Jenni and beautifully sandblasted giving the engraving a strong contrast.

SWISS SUPER-LUMINOVA

LET THERE BE LIGHT!

As we both love the iconic grade 5 titanium hour disc, we wanted to stick to the design but go for a matt finish and a dark colour...

Challenging the status quo did not fall short of practical aspects for the new RCT. To improve readability by night we wanted to light up the hour numerals and increase the brightness of the minute hand, which became a major task in the project...

CHALLENGING THE STATUS QUO

GLOWING 3D HOUR NUMERALS AND MINUTE HAND

REDESIGNED FROM SCRATCH

SUPER LEGGERA ROTOR

Another major part of the project was the rotor. We aimed to align the overall appearance and architecture of the rotor to the hour disc while reducing weight as far as possible to contribute to our set goal of creating the lightest VAULT to date...

STRAP

SWIMMING AGAINST THE CURRENT

We didn’t go down the obvious route when talking about the strap either. We knew that we were looking for something a bit different, which would fit into the overall concept and at the same time express our desire to make it a status-quo-challenging statement. We therefore opted for a blend of salmon skin on the top side adorned with an 18k red-gold stitching and accompanied by stonewashed ostrich leg leather on the backside. The materials are not only beautiful and comfortable but also sustainable and showcase that we would rather move away from alligator and snakeskin. Once again we had the pleasure of working together with our master strap maker Mirea Marian who did a fantastic job in handcrafting the strap to the specific wrist circumference of Albert.

CLOSING REMARKS

STRIVING TO CREATE THE WORLD`S MOST PERSONAL WATCHES

The exquisite VAULT V2+ RCT took over 12 months from inception to completion. It encompasses all we believe in and showcases our extreme dedication to overcoming whatever challenges we face to create one of the world’s most personal watches for those watch collectors who dare to be different and are ready to unfollow the herd.

We make the development process accessible for our collectors and by doing so take them on a unique horological journey.

tECHNICAL sPECIFICATIONS

MOVEMENT

+ V01+ automatic movement (exclusively made for VAULT by Uhrteil)
+ Inertia regulated balance wheel
+ Power reserve: ca. 55 hours
+ Frequency: 21`600 vph
+ Rhodium-plated brushed and 18k red-gold plated pearl-blasted skeleton rotor (designed by Laurent Auberson)
+ Pearl-blasted rhodium-plated centre plate
+ Black rhodium-plated brushed and bevelled bridges
+ Lasercut and hand-finished grade two titanium engraving bridges

case

+ 5-part case
+ Unique VAULT V2+ RCT carbon composite
+ 39mm Width
+ 46.7mm Length
+ 15mm Thickness
+ Sapphire crystal with a double anti-reflective coating ARunic®
+ Open case back sapphire crystal with a double anti-reflective coating ARunic®
+ Grade five titanium screws with signature VAULT screw head profile
+ Grade five titanium DLC coated 2-part crown
+ Pearl blasted grade five titanium mono-cage II

world of vault

bottom of page